 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Testing igniter assy on evcon furnace
How do you know if the igniter is bad or if the control box isn't activating the igniter. Is it possible to check to lead wires going from the control box to the igniter without taking out the igniter assy. Much thanks to hvac 1000s for your input. I would also like to thank you for helping other people out with you advice. What a great service you are doing because most people can't afford to hire a repairman and a furnace is such a important thing to many families. I am also from Ohio and I like your quote n if only the younger people of today would live by those words it would be a much better world. I have always told my children to look learn listen and gain from what other people can teach you. Thanks again hvac 1000s.
|
||||
Check out some similar questions!
Electronic igniter glows & fires up the burners but both the burners & igniter only stay on for a few seconds. This ignition cycle repeats three times before completely not working. Is this a bad igniter or something else? Thanks
My furnace is not lighting (I believe it is a Day and Night). When I turn up the thermostat, the venting fan motor comes on as usual.. followed shortly by the igniter (I can hear the "snap snap.." of the igniter), but after that, burner never comes on, so the blower never comes on etc. It has...
Getting a code 14. 1st the system comes on. I hear the blower going for about 90 seconds. 2nd the blower wheel spins and eventually I start to smell gas. The unit clicks 3 times but the ignitor never comes on. That's when I get a code 14. I cleaned the hot surface ignitor but it doesn't ever...
We have had to replace the igniter in our furnace at least 4 times in a little over a year. What could be making them burn out? We had two go out in just one weeks time! This was 12-25-07. We had a new one installed late April of this year so it wasn't used that much. We turned the furnace on last...
Carrier gas furnace will try to start, but igniter does not light furnace. Red light in window flashes -is thiis the "code" for the numeric list on the attached plate?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
