Ask Experts Questions for FREE Help !
Ask
    josephb37's Avatar
    josephb37 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 4, 2014, 04:28 AM
    How much pipe
    In total, approximately how much 1.5-inch pipe would be used to make bends of 25 degrees each, assuming that the bend radius is five times the pipe radius?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 4, 2014, 08:58 AM
    Homework?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    May 4, 2014, 10:14 AM
    Give me a illustration using the corr4ect fitting size. Quarter bend, eight bend, ect. Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove a glued PVC pipe from a cast iron pipe drain in my bathroom? [ 2 Answers ]

I have a very old house and have a cast iron pipe as the largest part of my waste drain in the bathroom. I want to place my toilet in a different area of the bathroom. If I want to do this, I have to remove the pvc elbo that is connected into the cast iron pipe. Is there an easy way to remove...

Replace 3" ABS pipe bonded into cast iron cleanout pipe [ 1 Answers ]

Need to connect new 3" ABS pipe to an old cast iron cleanout pipe just above cement floor. Need to create a new cleanout in 3" ABS that will be 12" above the old cast iron cleanout so that a main sewer line blockage between the main stack & the street sewer some 25 feet away can be removed. Had to...

Put pipe thread on abs to cast iron pipe threads? [ 3 Answers ]

I have a 1-1/2" cast iron show drain. will attach to 1-1/2" abs male threaded coupling. Do I need to put pipe thread or plummers puty on the threads?

Combining PVC pipe and ABS pipe.Bad Idea Jeans? [ 15 Answers ]

I'm remodeling a bathroom and mistakenly did my drainage using pvc pipe. My house had ABS, and we used some of the ABS that we cut out together with the PVC. This was all glued together with PVC primer and cement. I didn't realize that the black pipe was not pvc until tonight when I was...

View more questions Search