Ask Experts Questions for FREE Help !
Ask
    streamlight's Avatar
    streamlight Posts: 2, Reputation: 1
    New Member
     
    #1

    Apr 10, 2014, 03:20 PM
    Washer will not fill with water.
    Washer was working during the wash cycle but after it drained the wash water went through the spin, it would not refill for the rinse cycle. The washer just made a low buzzing noise and would not fill. Any suggestions?

    Kenmore 70 Series
    Model: 110.22712100
    Serial No: CL 1505447
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
     
    #2

    Apr 10, 2014, 04:00 PM
    My Washer isn't getting any Cold Water | Los Angeles Appliance Service Washing Machine Repair


    Washing machines have an electrically operated valve in them called a “water mixing valve”. This valve has separate solenoids for the hot and cold water. It's very possible that the cold water solenoid isn't working. Besides the cold water solenoid on the water mixing valve not working, it could also be that the shut off valve to the machine's cold water supply hose is closed or that the filtration screen in that supply hose is clogged up.
    Note the picture in the link, to find this valve and check its operation after you check the cold water filtration screens in the supply hose. Let me know if it solves your problem.
    streamlight's Avatar
    streamlight Posts: 2, Reputation: 1
    New Member
     
    #3

    Apr 10, 2014, 04:22 PM
    Thank you for the reply, I didn't have the cold water valve open behind the washer, anyway problem solved, thanks.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sprinklers causing my washer to fill with water [ 2 Answers ]

Why would my sprinklers have anything to do with my washer filling with water. When we turn the sprinklers off it doesn't fill. When there on it fills. Weird

Roper washer won't fill with water [ 2 Answers ]

I have a Roper heavy duty extra large capacity washer that won't fill with water. I can access the spin cycle when I turn the dial, but there is no "action" when I turn the dial to the fill & wash cycle. Any suggestions? Thank you

Kenmore washer will not fill with water [ 1 Answers ]

Got a kenmore 11020432990 washer. The water will not fill up on the tub. Water flow into the tub is good, but after about 3 inches I notice the water is draining out of the drain pipe, keeping it from filling it up. Could the water be just flowing through the drain pump or is it an electrical...

Kenmore washer will not fill with water [ 0 Answers ]

Hello, I have an older Kenmore 80 model no 110.82683810 top load washer. The problem is: I cannot get it to fill with water. I have, at this point, replaced the timer and the water inlet valve. This has not resolved the issue. I have checked the water level switch and it works fine. I can use...


View more questions Search