Ask Experts Questions for FREE Help !
Ask
    cindy54mac's Avatar
    cindy54mac Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2009, 04:43 PM
    Roper washer won't fill with water
    I have a Roper heavy duty extra large capacity washer that won't fill with water. I can access the spin cycle when I turn the dial, but there is no "action" when I turn the dial to the fill & wash cycle. Any suggestions? Thank you
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 4, 2009, 07:54 PM
    If the water is turned on then the fill valve, water temperature switch or timer could be the problem
    ShadowWalker's Avatar
    ShadowWalker Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Apr 26, 2011, 11:46 AM
    Check that the drain hose isn't creating a siphon and draining it as it tries to fill that was the problem I had with mine I just lifted the drain hose while it was filling it stopped it from siphoning and when I put the hose back into the drain I didn't put it down as far been working great since
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer (series 80) won't fill with water [ 5 Answers ]

Starts, stops, spins, and flushes out water appropriately - but won't let water in, neither hot nor cold, on any program / cycle. Any ideas? Need to fix it myself to keep housepeace...

Top loading washer: incoming water drains, won't fill [ 4 Answers ]

I have a top loading washer and the last time I put clothes in to wash, the water started "filling" the tub right away, so I went upstairs to bed. In the morning, the water was still "filling". The timer did not turn it off after the timed cycle. There was some water on the floor, but not over 8...

Kenmore 70 washer water fill leak. [ 2 Answers ]

I have a Kenmore 70 series washing machine (older model) that drips water from the same area that is used to fill the washing machine tub. Any suggestions on repairs?

Maytag Washer: Water fill intermittent [ 1 Answers ]

I have a Maytag washer, model number LAT9400AAW; washer is approx 14 yrs old. My problem is that the water fill is intermittent. Sometimes the water fills appropriately, other times the water stops filling, for both hot and cold water. When the water does stops filling intermittently, I hear a...

View more questions Search