Ask Experts Questions for FREE Help !
Ask
    cdonalee's Avatar
    cdonalee Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 31, 2014, 05:09 PM
    Harbor breeze 4-spotlight 95852
    I bought 2 of these light kits approx. 1 yr. ago and just now opening the boxes to install. One spotlight kit was missing the pull chain plate and mechanism. How can I obtain these parts?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Mar 31, 2014, 06:44 PM
    Try supply houses like parts for harbor breeze fans - BuyCheapr.com

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor breeze [ 2 Answers ]

I have 2 ceiling fans w/remote the both abruptly quit working no lights and fans won"t work either. Changed batteries still can"t get them to work any ideas?

Harbor Breeze [ 1 Answers ]

I have purchased a harbor breeze ceiling fan from Lowe's and it does not put out hardly any air when the fan is rotating. I have the button set for it to blow downward. I tried it in the other direction and it blows the air upward as it suppose to. I am contiplating on returning it. Did buy ...

Harbor breeze 136957 [ 0 Answers ]

I am intalling a Harbor Breeze ceiling fan and there are only 2 wires coming from the remote box? Where do I connect the copper ground wire from my panel? Do I just attach the copper wire to the mounting bracket? But if I do this, will the fan itself be grounded since the "ground" wire isn't...

Harbor Breeze Fan [ 1 Answers ]

I have a Harbor Breeze ceiling fan that is only a few months old. The fan no longer works because the remote no longer turns it on and there is no manual control to turn it on. The remote actually appears to be working so I think the issue is in the fan iteself. The light on the remote comes on...

Harbor Breeze Fan [ 1 Answers ]

Our ceiling fan was working from the wall switch, but our renter pulled too hard on the chain and broke it off at the motor assembly. So we could not adjust fan speed. We took it down, replaced iwith a new 3 speed fan switch - checked to make double sure the wires were in the right place (4 wires,...


View more questions Search