Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Circulating pump only turns on when I turn dial on thermestat for stove with back boi
[ 0 Answers ]
I have a stove with back boiler my problem is my circulating pump only kicks in when I turn the dial on thermostat but it will remain on even when pipes are cooled until I turn the dial again. I've tried changing the connections in the stat but the same problem persists
Radiant heat circulating pump runs when heat is not on
[ 0 Answers ]
My radiant heat circulating pump runs without a call for heat. I did drop a thermostat when moving it, and the wires got disconnected. I began to re-attach them, without shutting the power off. I know, a mistake. I may have touched two live wires. Now the pump runs constantly without a call...
My Heat Pump heats but doesn't cool. Air is circulating.
[ 1 Answers ]
My heat pump heats just fine, and the air handler is working, but it won't do the A/C in summer. I had this problem with another hp and it turned out to be the thermostat. Are there other things I should consider before replacing the thermostat? Ducts are being cleaned.
Hot Water Circulating Pump Installation
[ 1 Answers ]
Any diagrams or instructions for installation of a closed loop water circulating system with pump?
Hookup Outside water stove W/heat pump
[ 1 Answers ]
I am installing an outside water stove, want to use my duct system that is hooked to a heat pump, I have installed a heating coil in the system, plan on using a Honeywell thermostat 8000 that has 3heats/2cool/emergency heat need some sort of drawings, and how to hookup. Thanks dhoover:confused: View more questions Search
|