 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hookup Outside water stove W/heat pump
I am installing an outside water stove, want to use my duct system that is hooked to a heat pump, I have installed a heating coil in the system, plan on using a Honeywell thermostat 8000 that has 3heats/2cool/emergency heat need some sort of drawings, and how to hookup. Thanks dhoover:confused:
|
||||
|
||||
|
Look under 8320U for 3 stage.
http://customer.honeywell.com/techli.../69-1896EF.pdf This is for the thermostat. The rest of your stuff will be home brew and you will have to figure that out ON SITE. Good luck. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What should the water temperature be for average water heat pump for most efficiency
Why is there a large amount of water on the ground around my heat pump compressor?
Just unhooked old electric range-the cables were connected directly to the old stove. I picked up an electric range about 3 yrs old. The connectors on the back of the stove are too small for this large cable. Do i have to buy one of those pugs with an extension line and then a box to hook heavy...
I am considering replacing my gas fireplace which is more for looks than heating. I am considering installing pellet stove insert in place of the gas fireplace or a Heat Pump. Just looking for something that is cost / energy efficient. ANy Recommendations or expirences would be helpful. Forgot...
View more questions Search
|
