Ask Experts Questions for FREE Help !
Ask
    harold robinson's Avatar
    harold robinson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2014, 02:20 PM
    How do you replace the pulley at the rear of the motor?
    How do I replace the belt pulley at the rear of the motor? I have everything pulled apart.
    odinn7's Avatar
    odinn7 Posts: 7,691, Reputation: 1547
    Entomology Expert
    		  
    #2

    Jan 26, 2014, 02:48 PM
    In all honesty...if you're going to ask a question that you want an answer to...you MIGHT want to include some sort of detail...just saying.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #3

    Jan 26, 2014, 02:51 PM
    Loosen the set screw/bolt. You may also need a pulley puller.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove rear drive pulley on hydromatic troybuilt riding mower [ 1 Answers ]

I need to put a new belt on the rear drive pulley of a troybuit hydromatic transmission. I need to know how to get it on. The guards on the pulley will not let the belt go on. How do I take the pulley off. Thanks

How do you replace the trans pulley on a jd lt160? [ 1 Answers ]

The spines are stripped on this pulley and I was wanting to know if there are more than one way to replace this pulley?

Removing pulley from 18 hp b&s motor to replace? [ 1 Answers ]

'99 Civic Rear Brake question. I need to replace my rear brake shoes on a '99... [ 1 Answers ]

'99 Civic Rear Brake question. I need to replace my rear brake shoes on a '99 Honda Civic. I have never changed them before and I am wondering the difficulty level of changing them. The mechanic is charging around $250 and I asked AutoZone and their prices is $15.99 per shoe so I'm thinking it...

Craftsman rear engine riding mower drive belt pulley alignment [ 1 Answers ]

The drive belt that propels the machine keeps coming off the idler pulley. It appears that the idler pulley is positioned we below the other two pulleys. Is there a way to move the idler pulley up so it aligns with the others.

View more questions Search