Ask Experts Questions for FREE Help !
Ask
    Olen Stuart's Avatar
    Olen Stuart Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2013, 04:28 PM
    How to remove rear drive pulley on hydromatic troybuilt riding mower
    I need to put a new belt on the rear drive pulley of a troybuit hydromatic transmission. I need to know how to get it on. The guards on the pulley will not let the belt go on. How do I take the pulley off. Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 5, 2013, 02:17 PM
    Hi,
    Could you provide the model number from under the seat? Most later model pulleys are mounted to the transaxle housing and are removed with the shaft to which it attaches.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troybuilt Riding Mower [ 0 Answers ]

My Mower was working fine, I mowed the yard and wahed the deck, after washing deck, I went out about an hour later to put mower away. It starts fine, BUT, It will not accelerate, will not move. Have I knocked something loose while washing? What could be the problem?

How to remove and replace drive belt on murray riding mower [ 0 Answers ]

Battery for troybuilt riding mower replacement? [ 1 Answers ]

What would be the right battery part number if it were a napa battery . This is for a troy built riding mower 17.5 hp 42 inch blade.

Craftsman rear engine riding mower drive belt pulley alignment [ 1 Answers ]

The drive belt that propels the machine keeps coming off the idler pulley. It appears that the idler pulley is positioned we below the other two pulleys. Is there a way to move the idler pulley up so it aligns with the others.

Troybuilt Riding Mower Won't Start [ 1 Answers ]

I have a Troybuilt Bronco Mower. I just replaced the battery 3 months ago. Every time I turn the key on the ignition, nothing happens. It has fresh gas and new plug. All requirements to start the lawn mower were checked. The parking break is engaged, the blades are disengaged and the throttle...

View more questions Search