Ask Experts Questions for FREE Help !
Ask
    biggd22's Avatar
    biggd22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2012, 01:14 PM
    Removing pulley from 18 hp b&s motor to replace?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jan 5, 2012, 01:21 PM
    Quote Originally Posted by biggd22 View Post
    Removing pulley from 18 hp b&s motor to replace?
    You usually HAVE to remove something before you replace it... that goes without comment.

    What is your question?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to replace tensioner pulley on my B1500 Ram van [ 1 Answers ]

I don't usually work on this engine in my 2000 Ram van (conversion) with 3.9L V6. But I should be able to handle changing the tensioner pulley, which is starting to whine. The engine compartment is cramped. Can I do this by just slipping off the serpentine belt? Or do I have to remove other...

How to replace coil on b & s model 313707 0162e5 motor [ 3 Answers ]

How to replace coil on briggs & stratton motor medel 313707 0162e5

Removing Engine Drive Pulley from B&S 14HP [ 2 Answers ]

I have a Snapper LT140H38ABV 38" 14 HP Hydro Drive Tractor Series A with B&S 14hp motor Model# 287707-0228-01. I want to replaced the engine crankcase gasket as it has a serious leak. How do I remove the dual belt pulley from crankshaft ? I've removed the bolt from the end of the shaft but it seem...

B&S pulley removing [ 1 Answers ]

Have a b&s 12 hp old model need to place engine. Have to use the pulleies on the new one to make it work. Any ideas on how to remove them off the shaft and on the newer one.

Removing MTD engine pulley [ 3 Answers ]

I need to replace my drive belt but cannot get the pulley off, motor spins? Any suggestions? Also it is reverse thread correct? Thank You

View more questions Search