 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Roberts Gordon radiant tube heater runs continuously
Vantage II CTH2-125 heater starts and runs properly and with proper sequence, but does not shut off. Checked thermostat and wiring with meter - OK. Also changed tstat. Can hear relay when tstat cycled but heater runs continuously. Can only shut down with circuit off. Where should I look for defective part?
|
||||
Check out some similar questions!
Blower runs continuously unless I switch off at Heater (ON/OFF) switch. From Thermostat (Pro) I switch from Heat to OFF mode and blower runs forever.
The tenant moved out of my rental house in Sacramento. It is hot. While rehabbing the house, we turned on the HVAC system in cooling mode. It is a Trane XR80 UD1B080A9361A. It cooled the house satisfactorily but the condenser ran continuously. Even when the fan cycled off, the condenser...
I replaced the flapper a week ago as water was trickling continuously. All has been working well since then until today when the water gushes continuously from the overflow tube (arrow is pointing to it in my diagram in case I've called it the wrong thing). I'm a complete novice with home repairs...
Hi I have a Clare Hecla furnace and I have a problem where I've set the controls at OFF-110F and ON-150F with the limit at 170F. My furnace blower runs continuously 38mins to 24 minutes at a time and shuts down for a 2.5 minutes average. When the heater is on the blower continuous running and never...
I have a single-pole thermostat on a 240 v baseboard heater. The heater seems to be on continuously even when the thermo is turned completely down. Is it possible for a baseboard heater to operate on one leg of a 240 v circuit? And what do I need to do to get the heater to shut off beyond...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
