 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Shower Thermostatic Cartridge
I am trying to replace a shower thermostatic cartridge, but unfortunately do not know the brand or part number. I have attached a photo of it, if any insight or advice could be provided, it would be much appreciated!
Thanks, Stacey Help! I am trying to replace a shower thermostatic cartridge, but I do not know the brand or part number... I have a link to the photo, if ANYONE can offer any insight or advice, it would be greatly appreciated!! Thanks! - Imgur |
||||
|
||||
|
Hi Stacey
I can't promise, of course, but it looks like a type of GROHE cartridge to me...see image. You can contact them here and send the picture via e-mail...see if they can match it up for you: GROHE - European designed Kitchen Faucets, Bathroom Faucets & Showers If that doesn't work, then it is probably a cartridge from HANSGROHE...a brother (I think) that split the company off...contact them next if it isn't a grohe! This link should get you there: Faucets, showers, bathroom faucets & shower heads | Hansgrohe US Good luck and please do let us know how you make out, OK? Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Mico Designs Thermostatic 2 handle system in my shower. It started not putting out hot water, and had to keep raising the temperature until now its on the hotest setting but only outs out lukewarm water even though all other fixtures in the bathroom and throughout the house are fine and...
We have a fault on our mixer valve and hot water is bleeding in to the cold - and the combi boiler is on and off every few minutes. The bar mixer valve is constantly very warm to touch. The cold feed feels hot to touch. How can we fix it? Is it just a valve or something inside the bar mixer that...
I have had fitted a thermostatic shower mixer valve but I cannot adjust the temp it is either scalding hot or cold. My plumber said the valve was faulty so I replaced the cartridge but it is still the same. Could it be that if he has connected the hot and cold feeds wrong it would work like this....
I have a Hansa thermostatic shower valve with volume control and recently it started providing very little hot water pressure but plenty of cold water pressure. Do these valves fail all of a sudden?
View more questions Search
|
