Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kohler K-304-K valve has plenty of cold water pressure, but no hot water pressure
[ 1 Answers ]
So I just installed a K-304-k into a house. The house has been vacant for about 15 months now, so no one has been using the water. I came in and replaced the valve, and closed up the wall. I installed all the fixtures, and sure enough, no hot water. It comes out in a slow trickle. Here are...
NYC Water Pressure
[ 8 Answers ]
Hi does anybody know if there is a minimum water pressure that buildings are required to provide in NYC? I have weak water flow/pressure in my newly renovated bathroom. I live on the top floor (16) of a Brooklyn, NY co-op building. Management has had a plumber out here who confirmed I'm getting...
LP Minimum Test Pressure
[ 1 Answers ]
In South Carolina, what is the minimum test presssure for the first stage of LP gas piping that willl operate at 10 PSI?
NYC water pressure
[ 7 Answers ]
I would like to know if there is a minimum requirement for water pressure supplied to an apartment in a high rise in Manhattan. If so, where can I find written documentation.
LP Gas Pressure minimum?
[ 1 Answers ]
Ive got a 250gal lp fuel tank. My central unit is giving some major problems after a lighting storm came through. The tech. came out and replaced a defective motor on the unit but is still having problems with the heater staying lit. My tank is at 20%. The tech. is now saying that it is the... View more questions Search
|