Goodman 95 furnace blower keeps running 6blinks blowe comes on I have checked fuse o

jwatsonind Posts: 1, Reputation: 1

New Member

Jan 6, 2014, 03:55 PM

Goodman 95 furnace blower keeps running 6blinks blowe comes on I have checked fuse o

Goodman furnace 6blinks checked the fuse its of blower does not shut off

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Jan 6, 2014, 06:13 PM

Look on the inside of the air handler door for a chart to find out what 6 blinks mean and get back to us.

Add your answer here.

Check out some similar questions!

Goodman furnace instantly blows fuse when turned on [ 0 Answers ]

Replaced transformer and circuit board, still when I throw the switch the fuse goes.. followed the skimatics and all wires are correct,the thermostate is disconected and still blow fuse

Goodman GMP 050-3 furnace Blower Not Running [ 2 Answers ]

I have a Goodman gas furnace model #GMP050-3 Rev B that was put in service in 2002. The blower fan motor has stopped working and I need help troubleshooting it. It was working fine until a week ago when I noticed an electrical burning smell in the area it services. Now, when the thermostat calls...

Newer goodman furnace blower is running without any flame going code says 6 blinks [ 0 Answers ]

Furnace has been in house for a year the blower motor is running without the ignighter turning on and therefor no flame the code is blinking 6 times any thoughts?

Goodman Furnace AC System, fuse keeps popping [ 4 Answers ]

I have a Goodman Furnace/Ac System. The AC was running fine when I left for work, but when I came home house was very hot. The furnace was flashing 6 lights, which according to the manuel it is the roll out limit. Only problem is that the ac systemis electric, heating is gas fired. Manuel said it...

Goodman furnace keeps blowing fuse? [ 2 Answers ]

Goodman furnace about 3 years old. Thermostat was bad changed it, now furnace keeps blowing a fuse when we try to get it started. Already checked wires on thermostat everything correct. I pray it's not the mother board as my dad thinks. Any advise?