Newer goodman furnace blower is running without any flame going code says 6 blinks

priorlake Posts: 1, Reputation: 1

New Member

Jan 19, 2011, 06:00 AM

Newer goodman furnace blower is running without any flame going code says 6 blinks

Furnace has been in house for a year the blower motor is running without the ignighter turning on and therefor no flame the code is blinking 6 times any thoughts?

Check out some similar questions!

Goodman GMP 050-3 furnace Blower Not Running [ 2 Answers ]

I have a Goodman gas furnace model #GMP050-3 Rev B that was put in service in 2002. The blower fan motor has stopped working and I need help troubleshooting it. It was working fine until a week ago when I noticed an electrical burning smell in the area it services. Now, when the thermostat calls...

Goodman Furnace Model GMPN060-3 Three Blinks Diagnostics. [ 7 Answers ]

I have a Goodman Furnace Model GMPN060-3. I get three blinks biagnostic code. I changed venter (motor assembly) and pressure switch. Still the same three blinks. Moisture drain path is clean and free of debries. After the new parts, furnace started once, but would not start again -- same three...

Nordyne furnace with no flame, 3 blinks [ 0 Answers ]

Trane XB LED blinks 5 times and blower won't stop running, but no heat. [ 8 Answers ]

Problem: Trane XB LED blinks 5 times and blower won't stop running, but no heat. Any ideas what the solution is? I am thinking some kind of fan control board. I can shut off power to the whole unit, but when I power back on I get the same problem. Blower runs with no heat. The thermostat can be...

Goodman 90 plus furnace flame sensor [ 6 Answers ]

Goodman furnace is showing single blink every 2 seconds. I see that a possible problem is the FLAME SENSOR. My main question: Is the flame sensor the SAME part as the ceramic ignitor ? If different, where is it in relation to the ignitor ?

View more questions Search

Check out some similar questions!

Add your answer here.