Ask Experts Questions for FREE Help !
Ask
    Stonieman's Avatar
    Stonieman Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 27, 2009, 08:13 PM
    Goodman Furnace AC System, fuse keeps popping
    I have a Goodman Furnace/Ac System. The AC was running fine when I left for work, but when I came home house was very hot. The furnace was flashing 6 lights, which according to the manuel it is the roll out limit. Only problem is that the ac systemis electric, heating is gas fired. Manuel said it could also be the fuse, (small auto 3amp fuse) pulled fuse and it was short. I replaced fuse three times and it keeps popping. Any suggestions on what I could do next before I call a tech? Thanks
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jun 27, 2009, 08:49 PM
    Take no chances,, call someone,
    Stonieman's Avatar
    Stonieman Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 10, 2009, 05:01 PM
    Ok so I talked to a friend who is an electrican. I replaced the contactor on the condenser unit and now everything works. No need to call in a service tech, saved myself some money.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #4

    Jul 10, 2009, 06:47 PM

    Stonieman,

    Good for you, it is always good to have friends in high places, buy him a beer or something.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #5

    Jul 10, 2009, 07:18 PM
    Or do him a even better favor,, invite hime to church
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman force air fuse blown [ 6 Answers ]

My force air unit is manufactured from Goodman (Model CKL30-1L). The controller is on the attic. The fuses do not blow when it is switched to heat and the unit runs fine. However, when switching to A/C, all the fuses blow. Please advise for the problem.

Goodman. 3 amp fuse on the board keeps burning out. [ 4 Answers ]

I have a 9 year old 3 Ton Goodman central heating and cooling system. The furnace is horizontal Goodman and is located in the attic. Last summer I had replaced the fan motor, compositor on the condenser. The whole system shuts off after a night of use. The first time I discovered the burned fuse...

Goodman furnace keeps blowing fuse? [ 2 Answers ]

Goodman furnace about 3 years old. Thermostat was bad changed it, now furnace keeps blowing a fuse when we try to get it started. Already checked wires on thermostat everything correct. I pray it's not the mother board as my dad thinks. Any advise?

Fuse getting blown on Goodman logic board [ 4 Answers ]

I've Goodman forced air heating and Goodman A/C (compressor). The moment I put A/C on the 3A fuse blows on the circuit board which in the blower compartment of the furnace. Heat and blower work fine. Earlier nothing was working, it took a long time for me to narrow down the problem of fusing...

Goodman controller board fuse blows [ 8 Answers ]

I have a Goodman GMPN120-5, service guy replaced PCB in Aug due to A/C failure, root cause unkknown or not documented. Last week I turned on heat for first time this season, now nothing runs. Service guy returned, located blown 3A PCB fuse, replaced, still blows. Replaced fuse with 5A for testing...

View more questions Search