Ask Experts Questions for FREE Help !
Ask
    chae8's Avatar
    chae8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2013, 12:57 PM
    Goodman furnace gmp075 3 Serial # 9703821176
    Hi , my goodman furnace gmp075 3 furnace ,inducer turns on ignitor glows ,burners fire for about 5-7 sec,then turn off blower doesn't come onHi , my goodman furnace gmp075 3 furnace ,inducer turns on ignitor glows ,burners fire for about 5-7 sec,then it cuts off. What part needs to be replaced?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 27, 2013, 02:52 PM
    Before replacing anything, lightly sand or use steel wool and clean the flame sensor well. It is located across the manifold from the ignitor. Also make sure all vents are open.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Control board for goodman gmp075-3 furnace serial number0005601329 [ 0 Answers ]

I have a goodman gmp075-3 furnace serial number 0005601329 that will not start up. I have done some troubleshooting as outlined below: 1) turn thermostat up and exhaust motor comes on. Igniter does not glow and furnace light on board flashes 5 times. 2) Checked and am not getting 24V to gas...

Goodman gmp075-3 furnace not working [ 0 Answers ]

Fan does not shut off, even with thermostat disconected. Blinking code 5. Are these problems related, and how do I fix it?

Goodman furnace gmp075-3 manual [ 3 Answers ]

We have a Goodman Furnace GMP075-3 which we replaced the gas valve and flame sensor in 2008 for the same problem that I am about to describe that is currently happening AGAIN! The funace kicks on, it ignites, flame goes out and fan continues to run blowing cold. This happens intermittently NOW,...

Goodman gas furnace gmp075 3 [ 2 Answers ]

Hi , my goodman furnace gmp075 3 furnace ,inducer turns on ignitor glows ,burners fire for about 5-7 sec,then turn off blower doesn't come on,but if I let it cycle about 5 times then the blower does come on and it works fine,can anyone tell me what's wrong, thank you

Goodman Furnace GMP075-3 [ 1 Answers ]

Had a Heating Co. check my furnace. They found heat exchange cracked at heat exhange-burner entry venturi point and main center roll out missing. They said we should replace. Does that sound correct? Is the furnace safe to run?

View more questions Search