Ask Experts Questions for FREE Help !
Ask
    Furnace's Avatar
    Furnace Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2008, 08:11 PM
    Goodman Furnace GMP075-3
    Had a Heating Co. check my furnace. They found heat exchange cracked at heat exhange-burner entry venturi point and main center roll out missing. They said we should replace. Does that sound correct? Is the furnace safe to run?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 21, 2008, 03:44 AM
    They found heat exchange cracked at heat exhange-burner entry venturi point

    Any crack in the heat exchanger is bad news and the furnace is not safe to operate.

    main center roll out missing.

    How come it is missing? Did someone remove it?

    I would probably get a second opinion before I would let them condem the furnace.

    Do not operate furnace until you get a second opinion and the furnace is fixed (heat exchanger replaced) or the furnace replaced.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman heater gmp075-3 3-blinks on board [ 1 Answers ]

I have a goodman heater gmp075-3, the problem is it don't work. Cleaned vent replaced the pressure switch. Still nothing. The board blinks three time which supposidally means a clog somewhere?? Please help if you can. Tom

Goodman heater gmp075-3 3-blinks on board [ 1 Answers ]

I have a goodman heater, I have cleaned out the chiminey pipe, replaced the pressure switch and it still will not ignite, can anyone point me in the right direction to repair this? Tom

Goodman GMP075-3 ignition issue [ 10 Answers ]

I have a Goodman GMP075-3 furnace. The draft inducer comes on, the control board clicks, the ignitor bar glows, the control board clicks again and the glow bar stops glowing. It seems like the gas valve isn't opening to allow gas to ignite, at all. I've replaced a rollout switch, the flame sensor...

Goodman gmp075-4 problems [ 2 Answers ]

Problems with My goodman gmp075-4 furnace. The blower motor runs regardless of thermostat controls. The induction motor doesn't come on, unless The limit switch is unhooked... then she spins like a champ. I removed the induction assembly and cleaned it all out, including the flue. The trouble...

View more questions Search