Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What size aluminum to use, triplex?
[ 8 Answers ]
Hello, I am running a subpanel in my detached garage, 240v 100 amp panel. Distance is 170 ft. Direct burial, no conduit. Wondering what size/type aluminum to go with, 2/0 or 4/0, to comply with NEC code? By code I need the 4th (ground) wire because I will also be burying cable and data wire. ...
Triplex wire size
[ 2 Answers ]
General question on triplex wire size. My house was built in the mid 60s (new construction) & 100 amps. The wire from the weatherhead through to the panel is #2 AL. While working on the roof I took a close look at the triplex service wire and the conductors and messenger are both visibly...
Size aluminum wire?
[ 1 Answers ]
What size aluminum wire do i need for a 60 amp sub-panel run is 155 feet
Size an aluminum free standing pole to withstand 200 mph wind load.
[ 2 Answers ]
The pole is to hold a video-cam and will be hinged at the bottom. It will be exposed to the stated 200 mph from atop a levee structure.
Aluminum conductor size for service.
[ 10 Answers ]
I am installing a new service on my residence and I am installing a pole mount meter equipment box with CT metering equipment. It will have an ampacity of 400 amps and will feed both my home and garage. The service at the house is 120/240 volts and is a 200 amp panel. The run in question is 200... View more questions Search
|