Ask Experts Questions for FREE Help !
Ask
    FEKULA's Avatar
    FEKULA Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 18, 2011, 05:36 PM
    Size aluminum wire?
    What size aluminum wire do i need for a 60 amp sub-panel run is 155 feet
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Apr 19, 2011, 02:39 AM
    Use #2 aluminum 4 wire SER cable.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size aluminum to use, triplex? [ 8 Answers ]

Hello, I am running a subpanel in my detached garage, 240v 100 amp panel. Distance is 170 ft. Direct burial, no conduit. Wondering what size/type aluminum to go with, 2/0 or 4/0, to comply with NEC code? By code I need the 4th (ground) wire because I will also be burying cable and data wire. ...

Aluminum Wire [ 2 Answers ]

My sister bought a house and then discovered she has aluminum wiring. After promising to help her out, I quickly realized I was in over my head. First of all, I am a Master Electrician, but I haven't done residential wiring in years, other than personal home improvements. I work mostly...

Aluminum main panel to copper sub panel with aluminum wire? [ 7 Answers ]

I am upgrading branch wires in a house from aluminum to copper. Replacing all boxes... switch/outlet/receptacle/lighting, etc.. The house currently has a main panel (or lug not sure which.. maybe lug because there is no "main" breaker) next to the meter. The main panel is aluminum rated and has...

Aluminum conductor size for service. [ 10 Answers ]

I am installing a new service on my residence and I am installing a pole mount meter equipment box with CT metering equipment. It will have an ampacity of 400 amps and will feed both my home and garage. The service at the house is 120/240 volts and is a 200 amp panel. The run in question is 200...

How to safely wire aluminum to copper wire [ 5 Answers ]

I am switching a non-programmable t-stat to a Honeywell 5-2day programmable one that is for baseboard, covectors and fan-forced heaters. The model number is RLV430A. I have a wall Cadet heater so it should be OK. Problem is when I opened the package the wiring on the t-stat is aluminum. ...


View more questions Search