Ask Experts Questions for FREE Help !
Ask
    desertgurl's Avatar
    desertgurl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2013, 03:04 PM
    How to light a heil furnace 1002612a
    MyHeil 1002612A heater worked fine when PGE came out but now it won't come on. A new thermostat was installed laset yr.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 22, 2013, 06:01 PM
    Could be control panel, hot surface ignitor or any number of safeties. Could even be a loose front.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil furnace will not light [ 0 Answers ]

Heil Furnace Model # NUJ100DF03 Heater will not come on Igniter shows a brief flame then I hear a clunking noise from the gas valve area but no fire in the heat chamber If Thermostat is set on run the blower comes on and stays on with out the flame being on Any ideas?

I have a heil furnace that comes on for 2 minutes and goes off the green light flashe [ 1 Answers ]

I have a heil furnace that stays on for 2 minutes and goes out.the furnace flashes 4 lights what could it be

Heil Furnace burners won't light. [ 0 Answers ]

Hi, I have a Heil furnace, propane, in my shop 125,000/100,000 BTU. Looks to be an older furnace but came out of a remodeled house where it was working. 2" PVC exhaust, intakes in building. TStat is newer (used in house) confirmed good, furnace turns on, exhaust fan runs, igniter makes sparking...

What are the codes for the blinking light on a 2004 heil furnace? [ 0 Answers ]

2004 heil gas furnace. The heneywell gas valve blinks twice. If I turn the switch off( on the valve ) the blower comes on, then turn the switch back on and the unit operates. What are the codes for the blinking l.e.d.

I have a Heil NTG 3/FBF Furnace. My pilot light is not on. [ 4 Answers ]

I have a Heil NTG 3/FBF Furnace. My pilot light is not on. The fan will come on if I turn it on but with heat, but only cold air will blow. The pilot will not ignite all. I've tried cutting off power to the furnace and closing the gas valve and leaving it alone for 5 to 10 minutes. Then turning...

View more questions Search