 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heil furnace will not light
Heil Furnace Model # NUJ100DF03
Heater will not come on Igniter shows a brief flame then I hear a clunking noise from the gas valve area but no fire in the heat chamber If Thermostat is set on run the blower comes on and stays on with out the flame being on Any ideas? |
||||
Check out some similar questions!
How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...
I have a heil furnace that stays on for 2 minutes and goes out.the furnace flashes 4 lights what could it be
Hi, I have a Heil furnace, propane, in my shop 125,000/100,000 BTU. Looks to be an older furnace but came out of a remodeled house where it was working. 2" PVC exhaust, intakes in building. TStat is newer (used in house) confirmed good, furnace turns on, exhaust fan runs, igniter makes sparking...
2004 heil gas furnace. The heneywell gas valve blinks twice. If I turn the switch off( on the valve ) the blower comes on, then turn the switch back on and the unit operates. What are the codes for the blinking l.e.d.
I have a Heil NTG 3/FBF Furnace. My pilot light is not on. The fan will come on if I turn it on but with heat, but only cold air will blow. The pilot will not ignite all. I've tried cutting off power to the furnace and closing the gas valve and leaving it alone for 5 to 10 minutes. Then turning...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
