Ask Experts Questions for FREE Help !
Ask
    Jerrodvw's Avatar
    Jerrodvw Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2013, 02:16 PM
    Trane furnace xe90 flashing code 5
    I have a trane furnace xe90, model TUY080R9V3A1, serial number K504W507Gi. When I turn the power to the furnace on I get the 5 flashing code, flame present when there is no flame. Now sometimes I turn on the furnace and it will heat up the house, but once it get to temp. the inducer fan will stay running and when it calls for more heat the blower will turn on but no heat will come on. Then I turn the power off to the furnace, try to turn it back on and it "clicks" once like it's trying to ignite but nothing happens. I hope there is someone on here that can help me. Thank you.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 18, 2013, 06:28 PM
    Check the wire from the control to the flame sensor rod. If you find any problem, replacement is in order. Most likely the problem is in the control itself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace trane xe80 has 4 flashing lights for the thermal protector on [ 0 Answers ]

I have replaced the thermal protector. Furnace ignites then shuts down after a couple of minutes and continues doing this. When ignites, slow steady flash. Then back to the 4 flashes when furnace shuts down again what is causing this to happen. When I put in the new protector furnace ran for 12 hrs...

My Trane XE90 flashing red light [ 0 Answers ]

My trane XE90 wasn't giving out hot heat but warm/cool heat and the furnace light was flashing 2 lights which meant "Systems Lockout." I turned the thermostate off and the furnace switch off and let it sit for 30 min and then turned both back on. Now light is flashing constant. The control panel...

Trane xe90? [ 0 Answers ]

My xe 90 exaust fan comes on like it should then burner then fan to blow through house then it circulation fan shuts off and it goes though the 3 steps again it will do that acouple of times then stay on like it should can someone help thanks

My carrier furnace LED light is flashing a code. How do I tell what code it is? [ 1 Answers ]

The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?

Trane XE90 [ 4 Answers ]

Hi All, Hoping to get some quick help and keep the repairman at bay. Our Trane XE90 furnace keeps powering on, but it will not send any air out, warm or otherwise. We have changed the air filter... it is blinking three red LED lights, but I can't find out what that code means. Many thanks...

View more questions Search