Ask Experts Questions for FREE Help !
Ask
    jwhitlock's Avatar
    jwhitlock Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 28, 2009, 09:12 AM
    Trane XE90
    Hi All,

    Hoping to get some quick help and keep the repairman at bay.

    Our Trane XE90 furnace keeps powering on, but it will not send any air out, warm or otherwise. We have changed the air filter... it is blinking three red LED lights, but I can't find out what that code means.

    Many thanks in advance!
    Jennifer
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 28, 2009, 09:23 AM

    The code should be on the back of the bottom door or the control board its self. 3 usually means pressure switch. Does the furnace vent with metal or plastic pipe?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #3

    Nov 28, 2009, 10:55 AM

    XE90 is a 90 plus efficiency, check for blockage in flue pipe.
    jwhitlock's Avatar
    jwhitlock Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Nov 28, 2009, 11:29 AM

    Thanks all. I think I'm out of my comfort zone on this one. Probably better just to pay the damn weekend rate and get this fixed.

    I appreciate your help!
    Jennifer
    jwhitlock's Avatar
    jwhitlock Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Nov 28, 2009, 11:59 AM
    FYI... I think it vents with plastic pipe.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane XE90 blower issues [ 1 Answers ]

I'm staying at my mother's house while she is out of town. I decided to turn on her airconditioner and the blower wouldn't work. The compressor outsite works just fine. She has a trane xe90. We've had quite a bitof rain lately, and noticed that the water got up about 6 inches in here...

Trane XL20i heat pump requires Trane 900 series thermostat? [ 2 Answers ]

Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.

Blower won't turn off trane xe90 [ 3 Answers ]

I have a trane xe80. Approximately 13 years old. Heater will come on but occasionally the blower will not turn off after the heat turns off. The light flashes five times. Code indicates flame sensed after gas valve shut off. Could this be caused by inadequate air flow? I have a merv 11 filter...

TRANE vs Amana in New Home: Is a TRANE upgrade worth $4k? [ 8 Answers ]

Background/Details: Building new home in North Texas. Closing at end of August. Builder and I are in dispute over what hardware to install for the AC. House is gas heated so this is about the AC side only. The AC hardware that comes with the house is made by Amana (under license to Goodman...

Trane xe90 makes clicking and won't heat up to temp setting. [ 1 Answers ]

I have a trane heating system and I have already clean the flame sensor and replace the thermostat. The unit its set at 70 but it will only bring temp to 63 max. The burners will light up and then shutdown when the fan starts. Then, minutes latter the burners will come on again. I noticed that the...

View more questions Search