 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Problems with Intertherm electric furnace
Whenever I turn my heater on, It just goes on and off until we turn it completely off. Last year my daughter switched it from cold to hot without switching the temperature so ever since then it has been messing up. The model # is e2eb-012hb. Could someone tell me how to fix this and/or what is wrong with it?
|
||||
Check out some similar questions!
I have an intertherm in my mobile home and when I turn the heat on the fan won't come on and it makes a really loud noise. But it works fine on a/c and just fan. What might be the problem?
Can anybody give me step by step instructions for where the furnace wires go from the furnace to the new 60 amp breaker kit for an intertherm electric furnace. Hooked this up yesterday and the furnace is not blowing out hot air only warm?
The electric furnace makes clicking sounds (relays switching? ) and feels very warm to the touch, despite a thermostat setting of 60 deg F in July. The fan is set to AUTO and did not run at all. Are the relays shot and requiring replacement?
I have an Intertherm electric furnace model MAC 2260A, serial # F000156739. It only blows cold air, so I am assuming the heating element has failed. I have had great difficulty finding a replacement. Any ideas where I can find one? Should I be looking at something else as the problem, as well?...
I have an Intertherm E1EB-015HA electric furnace I recently had A/C Relay problems with it and since it is 10yrs. Old I thought I would just rebuild the whole thing. So I replaced the sequencers, limit switches, ac relay, transformer, and start capasitor, and installed a new digital non...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
