Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper way to install swimming pool skimmer and gasket
[ 1 Answers ]
I have an above ground pool with a standard out side skimmer I have followed instructions on the gasket installation and still lose about an 1 1/2 inches of water per day I have used dye and snorkel mask looking for a hole or tear with no luck.All my hoses are tight no leaks.I put the split gasket...
Proper way to install washer hose to laundry sink
[ 1 Answers ]
Hi, I'm moving to my new home soon and the plumbing in the basement is worrying me as it is something I have never seen before. Our laundry sink faucet has 2 pipe connections sticking out to the right on top on the same pipe which looks like it is for the washer. There are to closing at the top...
Proper shower pan install utilizing exsting basement shower drain
[ 6 Answers ]
I am remodeling a basement bathroom. I demo'd the shower and its tile to reveal rotted framing. I believe this is due to an improper or (more likely) not existent shower pan -- there was no water proof membrane between the tile/thinset and the framing. Can I build a proper shower pan...
Proper way to install copper pipe through basement wall
[ 2 Answers ]
I am putting a new water supply line in the older home we just purchased. There was a 3/4" galvanized pipe running from the city main to the water meter in the basement. I am replacing the galvanized pipe with 1" copper tubing. The galvanized pipe had rusted and holes in it where it went through... View more questions Search
|