Ask Experts Questions for FREE Help !
Ask
    ckbrtmn's Avatar
    ckbrtmn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2013, 12:07 PM
    When I try to inflate my bed there is no air coming out of hoses - Model EFCS-2
    When I try to inflate my sleep by number bed there is no air coming out of hoses - Model EFCS-2

Check out some similar questions!

Aqua Air Model V60 pressure tank, water is coming out of safety valve [ 14 Answers ]

I have a Aqua Air Model V60 pressure tank. When water is used, the pump runs and after it stops, water comes out of the safety valve (about half a cup). The pressure gauge above the safety valve shows 62 psi. Tank is showing 44 psi. Do I need to replace the safety valve?

Water is coming out of a tank before leech bed [ 1 Answers ]

I have two tanks one is 750 gallons and another 1000 gallons. At one of those tanks water is coming up out of the ground. We dug up the site of the water and that tank is completely full. We are trying to figure out what is causing this. Is there something wrong with the leach bed? Or just a clog...

Lennox furnace fan c23-31-1 is coming on but no air is coming through the vents [ 0 Answers ]

The filter is clean, it was working fine this morning, what should I check before I call someone?

Sleep number bed will not inflate or deflate. It is stuck at 30 [ 3 Answers ]

I need it to be more firm. And to move it to another place I need to deflate it. It is a full size and the left side works fine, I hear the pump and see/feel the results. The pump doesn't make any noise when trying to change the right side. Thanks for your help.

Furnace has Steady Red Light and is blowing air. No Air coming through vents though. [ 1 Answers ]

I verified the switch to operate the heating was on heat. And on. And when the switch on the furnace is held down it blows air but doesn't push air through the vents?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.