Ask Experts Questions for FREE Help !
Ask
    Seedorf1023's Avatar
    Seedorf1023 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 16, 2013, 12:59 PM
    Trane Furnace Question/Problem
    I turned my furnace on for the first time this year. The furnace starts running but burner does not kick on. It shuts off and starts over again. I noticed three blinking red lights. Any suggestions?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 16, 2013, 04:36 PM
    Somewhere on the furnace, probably on the inside of the blower door, is a key to the blink code.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane ex90 furnace problem [ 0 Answers ]

My furnace is firing up but won't stay up... it ignites and can see the blue flames but after a few minutes flames go out and only blowing cold air. It was fine yesterday. What could be the problem? There is a continuous flashing light code

Trane Gas Furnace Problem [ 13 Answers ]

I recently experienced a problem with my heat. I have a programmable thermostat and noticed that the heat wasn't on when it was suppose to be. The temperature was set to 75 but the temperature in the room was only 68. I canceled the program and manually set the temperature again to 75. The heat...

Trane furnace problem. [ 0 Answers ]

My trane XE 90 is short cycling, and the indicator light on the bottom panel is flashing 3 times in a row. It can not keep up to the set temperature. What can I do as a home owner to fix the problem?

Furnace question - Trane XE78 [ 1 Answers ]

I have a Trane XE78 and I currently have a blinking light. The light seems to be blinking at 2 flases. I have some info that says the that means there is an External Lockout (retries or recycles exceeded). I have no idea what that means, and is there som...

I have an XV90 Trane Furnace with a problem. [ 0 Answers ]

I have an XV90 Trane Furnace that will light the first burner but will not light the burners across to the heat sensor. It is doing this about 8 out of 10 tries and I have to turn the power off and back on to get it to try again. What would cause this? I know this is not suggested but I can...

View more questions Search