 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane ex90 furnace problem
My furnace is firing up but won't stay up... it ignites and can see the blue flames but after a few minutes flames go out and only blowing cold air. It was fine yesterday. What could be the problem? There is a continuous flashing light code
|
||||
Check out some similar questions!
Furnace will not work, seems the electronic igniter is not lighting so nothing is happening but I did turn the A/C on and the blower motor and everything works fine for that. A red light is flashing on some panel not sure if that's normal though.
I recently experienced a problem with my heat. I have a programmable thermostat and noticed that the heat wasn't on when it was suppose to be. The temperature was set to 75 but the temperature in the room was only 68. I canceled the program and manually set the temperature again to 75. The heat...
My trane XE 90 is short cycling, and the indicator light on the bottom panel is flashing 3 times in a row. It can not keep up to the set temperature. What can I do as a home owner to fix the problem?
I have an XV90 Trane Furnace that will light the first burner but will not light the burners across to the heat sensor. It is doing this about 8 out of 10 tries and I have to turn the power off and back on to get it to try again. What would cause this? I know this is not suggested but I can...
My furnace was in 2ft. Of water for about 24 hours. I replaced the blower motor and start capacitor because it shorted out. The blower will still not start. The 120v/24v AC transformer and the 5 amp fuse in the blower compartment check okay. Should I assume that the circuit board is bad and needs...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
