 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
38c84 gas valve substitute or replacement valve neeed.
1984 Columbia Steam Boiler with a 38C84 natural gas valve. Want to replace it with new valve and pilot light . Was told that 38c84 valve is obsolete and there is a kit to convert to a different valve. Boiler is 150,000 input - 120,000 output. Would like to install a new gas valve and a new standing pilot to keep things stupid/simple. Have not found a site with a model substitution table or adaptable valve listing.
What can be used for a replacement/substitute to the 38c84? With or without pilot ignition. Altering the gas line is not a problem. |
||||
Check out some similar questions!
I have an intertherm furnace model MGH-075AB with a unitrol gas valve, what valve replaces the old valve which is obselete.
I have a hot water heater that's just started shutting off. When I contacted Ge for technical assistance, they said that the thermocouple may have gone bad. I replaced the thermocouple and blew the gas line out to clear the burner and yet I still can not get my hot water heater to stay on. When I...
My GE oven has a gas leak at the connector between the gas valve and the gas value regulator. The appliance rep tech says the two parts are actually one unit and he can not losing the nut at the connector point. He says they are soddered. So he has to replace the entire part instead of repairing...
I have an empire heater and need a new gass valve, r-1624 empire says they no longer make them they are obsolete. Are there any that are that will work in its place.
I also have been having issues with my gas furnace. Apparently the needle valve inside is not working properly says the furnace repair man. He told me the valve needed to be replaced. Is this a part that can be easily removed and replaced by myself. I am a engineer if u care. What do I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
