Ask Experts Questions for FREE Help !
Ask
    remache74's Avatar
    remache74 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2013, 05:29 PM
    Join 2.75 cast pipe to 3 pvc tee fitting?
    I can't seem to figure out how to join a 2.75 cast pipe to a 3 pvc pipe... any ideas?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Sep 12, 2013, 05:21 AM
    Purchase a 3" service weight cast iron X 3" PVC shielded coupling... see image... available at any local plumbing supply store.

    Mark
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to fix a leak on a copper x pvc x cast iron Tee? [ 2 Answers ]

Hi, I just wanted to know how to fix the leak on the Tee fitting going to my toilet. It is 1/2" copper X 2" pvc x 3.5" Cast iron Tee that feeds water to my toilet and sink, and collects waste from my Toilet and washer machine. I can't find this fitting anywhere on the computer, and my plumber said...

How do join half inch PVC Pipe to 1 1/2 PVC [ 1 Answers ]

I am replacing a 1 1/2" tub drain with a 2" shower drain. The existing 1 1/2 PVC Tub Drain leads into 2 " on the main sewer line. Is three a way to remove the 1 2/2 line (maybe ream out the 1 1/2 pipe thats fitted into the 2 "??

3" PVC into 4" cast iron tee [ 4 Answers ]

I am attempting to mate 3" PVC to an existing 4" cast iron tee that is coming off the main vent/stack for the house. I remove a damaged piece of cast iron that from tee as well as the okum and lead. I am left with a 5 1/8-1/4" ID on the tee, it's a bell end, the OD on 4" PVC is only 4 1/2". Should...

Replacing Cast Iron Tee with PVC [ 20 Answers ]

Hi: I was attempting to clean out a clogged drain at the sanitary tee and the cast iron at the plug broke. The cast iron sanitary tee is still in good shape. As I see it, I have 2 options: 1) Remove the broken piece of cast iron pipe that comes out of the sanitary tee and plug it with an...

How to join PVC to cast Iron [ 1 Answers ]

I need to join a 4 inch cast iron to a pvc bent without using the oakum and packing led how do I do it??

View more questions Search