 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Duroguard condensing unit
I have a duro guard condensing unit. Ive replaced the contactor, capacitor, fan motor and main breaker. The fan will not come on and the compressor sounds like it tries to come on but won't. Could the compressor be locked up? If so why is the fan not coming on?
|
||||
Check out some similar questions!
The unit stop running sets and humbs
Why is my low side at 150 and my hi side at 140?
Outside unit compressor runs but outside fan goes on and off. Any suggestions?
Hi I have an Amana system that is maybe 15 years old. I can find out if anyone needs to know but I'm at work now so that will have to wait. Anyway, I have noticed that the cold air is not so cold anymore. The past few days that cold air problem has been compounded by the condensing unit not...
I installed a new condensing unit and put freon in the unit, I am getting the same pressure on the high and low sides of the gauges. This leads me to believe that there is a compressor problem or that I put too much gas in it. I am reading 150 psi on the high side and the gauge is pinned on the low...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
