Ask Experts Questions for FREE Help !
Ask
    langgettie's Avatar
    langgettie Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 8, 2012, 04:44 AM
    Ac help/condensing unit
    The unit stop running sets and humbs
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Aug 8, 2012, 04:46 AM
    Call an HVAC professional. There is nothing you can do about this as an average person.
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
    		  
    #3

    Aug 10, 2012, 09:42 AM
    Sounds like the motor is hosed. The part is probably going to run $150 or so and the labor will be about the same. If you're not licensed, don't try to tackle the wrangler yourself.

    Take smoothy's advice.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air conditioning condenser unit runs but fan in condensing unit goes on and off [ 1 Answers ]

Outside unit compressor runs but outside fan goes on and off. Any suggestions?

My condensing unit won't turn on [ 0 Answers ]

My condensing unit won't turn on when I put my thermostat on A/C cool to 60 degrees and the inside temperature is 89.

Leaks a/c condensing unit [ 1 Answers ]

There is no charge in my system, it leaked out. I don't have a vaccuum pump, how can I remove the air, could I run some r-22 through the system to chase the air? If so how can I do this. Do the scharder valve o-rings go bad? If so where can I buy them

Condensing unit not coming on [ 8 Answers ]

Hi I have an Amana system that is maybe 15 years old. I can find out if anyone needs to know but I'm at work now so that will have to wait. Anyway, I have noticed that the cold air is not so cold anymore. The past few days that cold air problem has been compounded by the condensing unit not...

New condensing unit problem [ 1 Answers ]

I installed a new condensing unit and put freon in the unit, I am getting the same pressure on the high and low sides of the gauges. This leads me to believe that there is a compressor problem or that I put too much gas in it. I am reading 150 psi on the high side and the gauge is pinned on the low...

View more questions Search