 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Could be loss of power, bad motor, bad capacitor, bad thermostat etc. Will it work if you switch the fan to ON mode, not AUTO? Can you hear the fan motor trying to start? First guess would be a start/run capacitor or a start capacitor depending on age and model.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Our central air will work for a while and then the blower will completely stop working causing the house to heat up. The unit is still working outside, but no air is coming out of the vents. When it does work, the blower will not stop once the temperature gets down to the set temperature.
I have a 5 year old Newmac CL 115 Wood/Oil combination furnace with central air connected. When I started the air conditioner this season the blower would not turn on in auto mode. The blower works fine in auto for heat, and I can force it to start with the ON function for A/C. Also, I have two...
Hi, When my blower for my heat/ac is working fine when I have it on heat (from the furnace) but when I switched the thermostat over to cool the cool air came out but wasn't forced i.e. the blower doesn't start up? Any ideas anyone? Thanks a lot.:confused:
I have a Carrier Weathermaker 8000. The blower motor runs at a low speed mostly and does not blow cold air with the condensing unit running. I changed out the fan motor control board with a new one and I still have the condition. The motor is not making any kind of noise, but it just runs at a...
The blower on my central air unit is not working. It starts to hum and if I spin the blades (which spin freely) manually it turns on for a few minutes but then shuts off. I turned the thermostat to ON and cool. Not sure the model number all I know is it says Sears All Conditioner on the side of...
View more questions Search
|
