Ask Experts Questions for FREE Help !
Ask
    jfieldson's Avatar
    jfieldson Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 27, 2013, 12:21 PM
    Goodman Furnace issue
    I'm replacing a blower wheel number B1368047. The only one I can find is B1368047A on which the set screw is on the convex face of the center plate. On the B1368047, the set screw is on the concave face of the plate. The B1368047A will not go as far onto the motor shaft, so the wheel and motor vibrate causing a loud noise throughout the house. The vibration will also damage the motor. I've ordered the correct number, B1368047 from others, but continue to received the B1368047A. My furnace is Model GMNT100-4B, so it's not 10 years old, and has only been installed for 8 years. The serial number is 0405706501. Does anyone know where I can find the right part?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Jul 27, 2013, 06:40 PM
    Where are you ordering the parts from? You need to have the parts ordered from a Goodman dealer, one with experience.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace Issue [ 3 Answers ]

The heater wouldn't run, the blower would come on but no heat because the burners wouldn't come on. A technician got it to run again until it came up to temperature, then it stopped. Then we replaced the pressure switch, the ignitor and the transformer and we got the burners to come on and it ran...

Goodman GMP100-4 furnace issue [ 0 Answers ]

I have a Goodman GMP 100-4. My problem is the blower is not blowing. The unit is blinking 4 times. From my research, this appears to be the limit switch or auxiliary switch. The blower wheel will not turn by itself, but we are able to reach in and rotate it which then starts it. However, when...

Goodman furnace issue [ 0 Answers ]

I own a gpd1004 sn-0104625001. I have had 2 hvac companies checking my gas furnace. Neither could find out the problem.. My furnace was bought new in 2001 9yrs. Old. The problem is, it will try to turn on, igniter will come on , inducer will come on, but no gas will come out. Then it shuts...

Goodman Furnace electrical issue [ 48 Answers ]

Have a new Goodman furnace that has a peculiar issue. The furnace will heat just fine and burners will shut off normally when set point is reached. After the burners have shut down, the blower will run for a minute or so then it seems as though it is given a signal to stop then immediately...

Goodman furnace issue [ 5 Answers ]

Had a Goodman furnace model # GM 80903 BN installed a year ago, right from the start, the problem started with the burner not igniting when the blower moter is running continuously. I have to have the motor running continuously for the particular model of air-cleaner I have to work properly. So...


View more questions Search