 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman furnace issue
I own a gpd1004 sn-0104625001. I have had 2 hvac companies checking my gas furnace.
Neither could find out the problem.. My furnace was bought new in 2001 9yrs. Old. The problem is, it will try to turn on, igniter will come on , inducer will come on, but no gas will come out. Then it shuts down after 3 tries. Sometimes it comes on and works like it should but we never know when that is going to happen. Then it doesn't work on the next try, sometimes when it is working you can hear the burners shut down but the fan still is running and then the burners will kick back on. I have replaced the board, igniter, flame sensor, limit switch inside the unit, and pressure switch... I have spent a little over $700.00 to the techs just for labor. What else can I do. I am in Illinois and the weather is cold |
||||
Check out some similar questions!
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Have a new Goodman furnace that has a peculiar issue. The furnace will heat just fine and burners will shut off normally when set point is reached. After the burners have shut down, the blower will run for a minute or so then it seems as though it is given a signal to stop then immediately...
Had a Goodman furnace model # GM 80903 BN installed a year ago, right from the start, the problem started with the burner not igniting when the blower moter is running continuously. I have to have the motor running continuously for the particular model of air-cleaner I have to work properly. So...
Hi I have GMP075-3 model of a Goodman gas furnace. The heater would make the sounds that it was beginning to work. I could see the ignitor light but then nothing else would happen. The repair guy came and said the Burner roll-out limit was somehow tripped the other day. Possibly from a down...
My Goodman heater won't fire up. When I turn the heat on, the sequence of events: 1) Small fan at top section turns on. 2) Heating element turns on, bright red. The system sounds like it is trying to turn on. 3) Then the bright red goes off. The fire does not light. The fan does not start 4)...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
