Ask Experts Questions for FREE Help !
Ask
    unique442000's Avatar
    unique442000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2013, 01:03 PM
    Kitchenaid Dishwasher kude20ixss6 won't start no LEDs lit.
    Dishwasher controls don't light up on touch, can't start the DW. Checked power to dishwasher, it's OK. This is the second time this problem has occurred.
    The repairman fixed the problem last time using a special lubricant to the door latch. He showed me the diagnostic start sequence, using three keys pressed 1-2-3-1-2-3-1-2-3. Tried that this time and nothing happens.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 14, 2013, 02:11 AM
    Look at these: https://dl.dropboxusercontent.com/u/...ishwashers.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

KitchenAid dishwasher Wash arm won't come loose, noisy dishwasher [ 5 Answers ]

I'm trying to figure out why my Kitchenaid Dishwasher, model KUDP01LBS3, is so noisy. It's just out of 10 year warranty. I tried to remove the retainer which holds the lower arm, and it won't unscrew. It just keeps turning. Is there something else I should be doing? The basic problem is that...

Kitchenaid dishwasher won't cycle [ 4 Answers ]

KitchenAid Dishwasher KUDS02FRSS1 The machine fills with water when started and the spinning arms start to spray water. After a few minutes, the washer drains and starts to make an odd humming sounds until the very end. The dishes come out with a film/stains on them like soap was dispensed but...

Dishwasher won't start, water in bottom, won't turn on at all, lights don't go on, [ 0 Answers ]

Dishwasher is a kenmore ultra wash, won't turn on, stopped before cycle was finished, water in bottom, can't get it to turn on to drain, no lights no nothing, have tried other plugs,nothing

Sears Kenmore Dishwasher start button won't start unit [ 0 Answers ]

I have a Kenmore Ultra Wash dishwasher that will not start when pushing the start pad location. It will pump when put on the Cancel/Drain button, but will not start after that. It does have power, or the pump would not run during the Cancel/Drain cycle. The washer was purchased in Jan 20, 2006...

View more questions Search