Ask Experts Questions for FREE Help !
Ask
    Glen Key's Avatar
    Glen Key Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2013, 08:35 AM
    Briggs & straton carb. Linkage
    Not sure of the year model but have a craftsman lawn tractor that has started to fluxuate in power. I think I am missing a linkage to the carb. But am unable to find a photo of the linkage to see if anything is missing.
    When this first started I changed the spark plug, fuel filter and air filters. I took the carb off the engine and only recall removing two different linkage parts. Motor runs, but governor keeps slowing down the motor. Help
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 4, 2013, 09:01 PM
    Hi,
    Please provide machine and engine model numbers. Machine number is under seat and begins with 917. Engine numbers are above the spark plug or on a tag pop rivetted to the blower housing above the cylinder and has three sets of numbers/letters that are designated Model, Type and Code.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs&straton 14 h.p. I/c no fuel past carb. [ 1 Answers ]

Won't run unless fuel is dropped in air breather what is the electral connection on bottopm of carb?

Briggs stratton 11 horsepower engine carb linkage diagram [ 1 Answers ]

Picture showing carburator control linkages

17.5 briggs motor need help with carb linkage [ 1 Answers ]

Yes I have a ryobi riding mower with 17.5 briggs engine model# 31C707 type 0154E1 code # 020926ze. I am missing springs and linkage for the choke and from the governor. I need a detailed picture as the carb is mounted on the engine. Where I can see where they go and what they look like. Thank you...

B & S carb linkage [ 1 Answers ]

Briggs & Stratton carb linkage Need detail for linkage setup on 7 hp engine, including springs and control lever setup. Any suggestions on a source? Mojoo

Briggs & Straton 14.5 ovh starts if I pour gas in carb but won't keep ruunning [ 2 Answers ]

I have Murray rider mower with a Briggs & Straton 14.5 OHV Engine. It does not even try to start unless I pour gas directly into carb. It appears to have good compression. If I take the breather off and pour gas directly into carb, it starts and runs long enough to use up that gas then dies. I...

View more questions Search