Ask Experts Questions for FREE Help !
Ask
    BrokenHorns's Avatar
    BrokenHorns Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2013, 01:01 PM
    Kenmore dishwasher not working
    Have a Kenmore Ultra Wash Quiet Guard 3 dishwasher with a blinking normal wash red light. Can't get the dishwasher to work.

    Is there a button sequence to get the washer to work again?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jun 23, 2013, 09:38 AM
    See: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
    Resetting Kenmore fault codes
    Kenmore Dishwasher_repair

    Step one: Hold "Normal Wash" and "Start" together for 10 sec.
    Step two: Press "Air Dry" and "High Temp Scrub" back and forth until "Quick Rinse" button turns on solid.
    Step three: Press "Normal Wash" again followed by "Start."
    Step four: Let machine run until you see green "Clean" light come on.
    Step five: Press "Normal Wash" again and "Start" again.
    That's it.
    This came from another post here.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dishwasher Not Working At All [ 9 Answers ]

I have a Kenmore Dishwasher Model #665 15779. It was working fine the other day and now it doesn't work at all. No lights in the display or anything either. I checked for power at the main connection and it is there. I opened up the front panel and checked the door switch and that appears to be...

Kenmore dishwasher not working [ 1 Answers ]

Hi! Our (7 year old) Kenmore dishwasher was making some very strange (loud) noises; like it was stuck going into the next cycle or something, it would still go all the way through the cycles though, was just loud. Now it won't go past the 1st cycle; I started it in the morning, ran errands, went...

Kenmore dishwasher not working [ 0 Answers ]

I have a kenmore dishwasher model #665.16532; bought March 2003. When I start it up, the sensing light is on for a long time, then when it finally shows the time, everyhting is quiet. Whe I press canel/drain, I can hear the water draining.

Kenmore dishwasher not working [ 1 Answers ]

I have a kenmore dishwasher about a year old water fills up and then nothing I heard something pop last night and then the diswasher stopped and now nothing only a year old and the front panel may be fried that is sad wa saved up money for this dishwasher and now it is broken model # 587 1410 ...

Kenmore Dishwasher not working [ 1 Answers ]

I have a Kenmore Elite Ultra Wash dishwasher. During the last cycle, something fell out of the rack onto the spray arm and, I guess, blocked it. Now there is water in the bottom of the unit and none of the buttons seem to be functioning---there are no lights on and I can't get them on. I am...

View more questions Search