Have a Kenmore Ultra Wash Quiet Guard 3 dishwasher with a blinking normal wash red light. Can't get the dishwasher to work.

Is there a button sequence to get the washer to work again?

See: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
Resetting Kenmore fault codes
Kenmore Dishwasher_repair

Step one: Hold "Normal Wash" and "Start" together for 10 sec.
Step two: Press "Air Dry" and "High Temp Scrub" back and forth until "Quick Rinse" button turns on solid.
Step three: Press "Normal Wash" again followed by "Start."
Step four: Let machine run until you see green "Clean" light come on.
Step five: Press "Normal Wash" again and "Start" again.
That's it.
This came from another post here.