Air handler varible speed wiring to the thermostat

Check out some similar questions!

Goodman air handler thermostat wiring? [ 0 Answers ]

I have a new goodman air handler aepf 42 model and a honeywell thermostat but can not get a wiring diagram that makes sense can anyone help? The thermostat has terms y,g,rh,rc,w the air handler has thermostat wires c,g,w1,w2,y1,r,y2 the system I have is air handler with heat strip kit only no a/c...

A/c thermostat wiring air handler and condenser [ 1 Answers ]

The air handler tells the condenser what to do,how do the wires go? From the t-stat yellow,red,green,white,blue! From the condenser,red and white?in the air handler red,white,green,blue,orange,brownand yellow what goes where and how do they connect

Duel heat thermostat wiring to air handler and oil burner [ 1 Answers ]

I have the following system I am trying to wire... Goodman Heat pump gsh140361a Goodman air handler aepf30361a Visionpro th8320 thermostat EFM oil burner Outside thermometer I am attempting to set up my system to run the oil burner as the secondary heat (below 40 degres) and I am unable...

Trane XL16i, Variable Speed Air Handler, 803 thermostat [ 3 Answers ]

We purchased this unit about 8 weeks ago and it's been nothing but a headache. Trane's field rep came out Friday with the installer and they gave the unit a complete going over. Checked duct work, everything. Even replaced the thermostat. Was assured everything was mechanically correct. The...

Ruud varible speed air handler [ 3 Answers ]

I am installing a new two stage heat pump, rudd IUHPL. The 24 volt transformer is in the air handler. The transformer is energized and putting out 24 vt. Which enters the circuit board. The red wire leaving the board is 0 vt. As I understand the system this red wire is supposed to supply 24 vt to...

View more questions Search

Check out some similar questions!

Add your answer here.