Ask Experts Questions for FREE Help !
Ask
    Coreyack's Avatar
    Coreyack Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2013, 12:31 PM
    Where does the jumper wire go on a spa panel for 50 amp
    I was given an older jacuzzi spa with a balboa H136 circuit board. It was set up for 110v and I am converting it to a 220v. My question is about the 50 amp jumper wire, there isn't one there for the 20a or the 50a. What type of wire and where does go to for the 50amp?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Apr 26, 2013, 01:05 PM
    What jumper wire are you talking about?
    You say "the" 50 amp jumper wire. You make it seem like every spa has this jumper when that is not nearly the case. Some spas are convertible from 120V to 240V or 120/240V, but not most.
    You'll have to give us quite a bit more info or background on this spa.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wire size required from 200 amp main to 100 amp sub panel [ 1 Answers ]

The sub panel is located @75 feet from main panel.

How to wire a 200 amp sub panel from the main panel [ 3 Answers ]

I have a 200 amp main panel and want to run power to the 200 amp sub panel, I am looking at using this breaker, Siemens 200-Amp Siemens Main Qpp Breaker Model # Q2200B Internet # 100144183 Store SKU # 196327 Store SO SKU # 516939 on home depot website and turn it sideways to get the power to the...

Can I Update My 100amp Panel To A 150 Amp Panel Using The Same Awg2 Al-Triple Wire [ 1 Answers ]

Can I Update My 100amp Panel To A 150 Amp Panel Using The Same Awg2 Al-Triple Wire That's Coming Into My House From Meter? Or Will I Need To Update That Wire To A Larger Wire?

100 amp main, 100 amp service wire, 200 amp sub panel? [ 2 Answers ]

I am moving my sub panel and upgrading to a 200 amp service, but in phases. The first phase is to move the panel due to some remodeling. I want to put a 200 amp panel in the laundry room with a 200 amp breaker. I have 100 amp feeder wire going to it (AL 2/2/2). Outside I have the meter can and...

Wire UF wire to run to new 100 amp service panel? [ 10 Answers ]

My house has a 200 amp service. I have a new 30x40 building in back. I have a 100amp Square D load center for the building. I want to run a line from the house to power the building. Big items include, air comp 30 amps, welder 50 amps, other raidial arm saw, ban saw pipe saw 15-20 amps? It is...

View more questions Search