Ask Experts Questions for FREE Help !
Ask
    John Quinlan's Avatar
    John Quinlan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2013, 11:40 AM
    Craftsman lt100 mower belts
    I want to know what belts I need for an LT 1000 Craftsman mower and how to replace them. John
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 28, 2013, 01:38 PM
    Hi,
    Look under the seat for the nine digit number beginning with 917 and I can probably give you the link to the manual.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman LT100 riding mower, can't get power to the starter [ 4 Answers ]

Good battery, new ignition switch and new starter solenoid. I have 12 volts on ignition switch side of solenoid, but when the key is turned to start position, it clicks and I never get power to the starter. When the key is turned to the first position to power the lights, they come on and I still...

Craftsman lawn mower #917273030. How do you tighten the belts that go to blades? [ 1 Answers ]

I have a craftsman lawn mower model 917273030,when the blades hit the grass they stop spinnig, belts slip. I need to know how to tighten the belts that go to the blades. Thanks

Craftsman LT100 mower trouble [ 1 Answers ]

Was tuned up in May of this year and ran OK for a while. Starts and runs for a half tank of gas then stops. Happened several times. Was told it could be bad gas. Got a good brand of gas additive with same results. Was told it could be a bad gas cap so replaced it with same results as before. ...

Craftsman DLT 2000 Lawm Mower (Belts) [ 1 Answers ]

I have a Craftsman 2000 DLT Lawn Mower with a 48" deck. What is the length of the belt that goes from the pulley on the motor to the deck?

View more questions Search