 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 395CAV042091 limit switch manual reset location
I have a Bryant 395CAV042091 Upflow forced air furnace, it is vented
Through my fireplace? The code I'm getting says it's the limit switch, I've cleared the obstruction I just can't seem to locate the manual reset For the limit switch and the manual is not detailed enough to show me. Can anyone give me a specific location. |
||||
Check out some similar questions!
Ducane package unit with gas furnace. Led flashes 3 times which indicates pressure switch stuck closed or open. I unhooked tubing and blew air into it, seems to be working OK, also I disconnected wiring and re-attached. This is the honeywell switch mounted on left side wall of compartment. I...
Can't find limit switch location on norodyne furnace model fg6rc 080c -16b. Updraft gas furnace. The red led stays on solid, works with ac, bit won't run at all for heat. No reset buttons, I found 2 are poped out. I found 2 bad limit switches, L250-25f , laying by the furnace from last service...
The bryant furnace we have is blowing cold air and when we try to increase or decrease the temp it flashes "HC" with heat, cool, auto, mngmt to the right of the "HC" what could be wrong? The filter was replaced 2 weeks ago and is clean.
My Bryant 350MAV furnace is not working properly. While the blower is first running it flashes a code 12. Then the light goes on solid and the burner never ignites. If I hold the manual rollout reset button for 20 seconds the ignitor starts to glow and the burner ignites. What needs to be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
