 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Limit switch location
Can't find limit switch location on norodyne furnace model fg6rc 080c -16b. Updraft gas furnace. The red led stays on solid, works with ac, bit won't run at all for heat. No reset buttons, I found 2 are poped out. I found 2 bad limit switches, L250-25f , laying by the furnace from last service calls for same problem. I can't see where this thing is to replace it! Any help would be appreciated as I'd like to do this myself. Thanks, Lars
|
||||
Check out some similar questions!
Where is the fan limit located on the Carrier 58CVA110-22 furnace? This furnace is flashing code 34.
Have a limit switch problem do not know where to look for this switch
I have an led indication a limit switch failure. Fan blows but not heat. Fan won't stop without removing power to unit. The schematic on door is washed out, so not very useful.
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
