[indyjoe]

How do I program my harbor breeze ceiling fan to work with my remote

[scott53715]

Both the fan and remote have to be set on the same frequency in order to work. Both units have a "DIP switch" which are a bunch of little switches. The remote DIP is probably located under the battery. The fan is somewhere under the canopy of the fan (instruction manual should show the location); but it should be easy to find. These two sets of switches need to be set the same (switch up or down) all of them. There should be a mark on each to orient the switches. So set them up, up down, up (whatever). You might get interference from a neighbor and have to reset them (light magically turns on for no reason.) This happened to me. Once you find these small DIP switches you will see what I mean. Good luck!