 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hp29-030
My outside unit works fine in AC mode-- outside temp is 65-70° suction pressure is 65 discharge pressure is 225
When in heat mode after app 5 minutes the suction pressure is 25 and the discharge pressure is 350 The compressor will kick out because of the internal safe circuit Removed sensing bulb for the TXV above the filter and heated it to see if this made a difference -- it did not. Is my TXV vale causing the restriction? Or what is my problem. |
||||
Check out some similar questions!
The Lennox HP 29-036 unit just stopped putting out heat, but the fan runs constantly. Have checked the breakers and they seem fine.
Air turns on,after about 1 hour copper line starts freezing and makes it shut down, does any body know what this could be, thanks, Dave
Hello- I have a lennox hs29-030-1p ac that stopped working. I turned the unit off & flipped all the breakers and waited an hour before I turned it back on... cold air started to come out, BUT the FAN on the OUTSIDE unit was not spinning. I turned the unit back off and am now wondering what sort...
Outside unit cooling fan runs a few minutes and stops. Changed capacitor and worked a day or so and is now doing the same thing. When fan stops compressor still runs and fan is getting very hot. Is the fan motor going bad or could the new capacitor be bad as well, or could something be burning the...
The inside unit on our lennox heat pump is working including the fan but the outside unit is not running at all. Every time that you kick the breaker on, it throws again. At the moment the breaker is off but the outside is humming. I have kicked the breaker on and the fan in the stop of the unit...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
