Ask Experts Questions for FREE Help !
Ask
    GNHS's Avatar
    GNHS Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2006, 08:19 AM
    Harbor Breeze fan
    Have a Harbor Breeze fan -Model AER52BP5LKRC -
    It has a 3 speed fan, lights w/ dimmer and a remote.
    The fan works fine with the remote. But the light only goes on and off - it won't dim.
    Is it wiring or the fan/lights?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 26, 2006, 03:24 PM
    Are you holding down the light button or the dim button? If it is actually broken it would be the remote receiver, presumably, or the remote control. Not wiring.
    GNHS's Avatar
    GNHS Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 30, 2006, 10:56 AM
    We replaced the receiver and the remote. There is no "dimmer" button on the remote. The description from the manufacturer says "Remote control with LCD with 3 fan speeds plus an "instant off" button and full range light dimmer". The remote only has two actual buttons- one with a picture of a light and the other with a picture of a fan, then there is a LCD screen above that. The instructions say to hold down the light button to dim the lights. So, any ideas?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Oct 30, 2006, 12:20 PM
    You replaced the receiver and the remote, and now it's not working? Sounds like maybe the replacement(s) are defective. Can you exchange them?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze fan [ 6 Answers ]

I have a habor breeze flush mount fan that is 10 years old (I use it ALL the time) and it is making a lot of noice recently. Can there be something done to stop the noice? Can it be oiled in some way?

Harbor breeze fan [ 4 Answers ]

I have a harbor breeze ceiling with a remote that was never wired in.can I reverse the fan direction manually.

Harbor breeze fan [ 1 Answers ]

We recently installed a harbor breeze fan. It worked fine initially, then did strange things. It stopped spinning one direction and reversed itself. It did this twice. Now the speed of the fan is not working at all - it barely turns. An electrician checked the installation and checked the...

Harbor Breeze fan problem [ 3 Answers ]

My H.B. fan is controlled by remote. The fan itself is still working by remote, BUT the light will not turn off or dim by remote! (That is the only control.) When you try to dim it, you do see the numbers go down on the remote itself, but nothing happens. Where do I go? What do I do? I don't...

Harbor Breeze fan [ 3 Answers ]

Just installed my fan and everything works perfectly. After 10 minutes, the HI speed does not work anymore when pushed on the remote (the fan is just stopped) and it looks like MED and LOW speeds are the same. Can anybody help me with this? Thanks

View more questions Search