Ask Experts Questions for FREE Help !
Ask
    forneymomof2's Avatar
    forneymomof2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2006, 09:02 PM
    Harbor breeze fan
    We recently installed a harbor breeze fan. It worked fine initially, then did strange things. It stopped spinning one direction and reversed itself. It did this twice. Now the speed of the fan is not working at all - it barely turns. An electrician checked the installation and checked the wiring in that room - both were fine. What could the problem be... a bad fan motor?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 10, 2006, 10:16 PM
    Is it a remote fan? If not, sounds like a bad capacitor. Either way I would exchange the fan.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze fan [ 6 Answers ]

I have a habor breeze flush mount fan that is 10 years old (I use it ALL the time) and it is making a lot of noice recently. Can there be something done to stop the noice? Can it be oiled in some way?

Harbor Breeze Ceiling Fan [ 6 Answers ]

Have a Harbor Breeze ceiling fan with remote and the power was shut off from the circuit breaker box and now my fan or light will not come on. Checked the connections, dip for the remote and reset the circuits but no luck. Any one with any ideas please pass along. Thanks

Harbor breeze fan [ 4 Answers ]

I have a harbor breeze ceiling with a remote that was never wired in.can I reverse the fan direction manually.

Harbor Breeze Fan Problem [ 1 Answers ]

I have just installed a Harbor Breeze 52in Cheshire Ceiling Fan into a spot where I had an old fan with a light. I hooked it up the way that the directions said to and the fan works fine but the light dose not come on. I used a tester and there is no power coming from the wires that are going into...

Harbor Breeze fan [ 3 Answers ]

Just installed my fan and everything works perfectly. After 10 minutes, the HI speed does not work anymore when pushed on the remote (the fan is just stopped) and it looks like MED and LOW speeds are the same. Can anybody help me with this? Thanks

View more questions Search