Branching off wires

Check out some similar questions!

Three white wires & three black wires to dimmer switch with 2 black wires - Help! [ 2 Answers ]

I'm installing a new dimmer switch and when I removed the old on/off switch, I found 3 white cables all tied together and 3 black cables. I know that the cables also connected to the light switch in the guest room. I just don't know what to do with my 2 black wires from my new dimmer switch, and...

The wires on my Duraguard Heat Pump Low Voltage do match the wires on My Bryant Furna [ 0 Answers ]

Wires came loose while changing switch need to get wires matched.keeps blowing fuse [ 2 Answers ]

My question is to match the right color wires to operate ceiling fan and light fixture. The wires came loose before I could match them. The swith has three colors black, red and blue. The colors that are to be matched with are green, red and orange. How do I match these. Additionally it has a...

Ceiling fan 3way switch has 4 wires and new one has only 3 wires. How do I replace? [ 1 Answers ]

The 3-way speed switch on my ceiling fan broke. I bought a new switch from Home Depot. The original switch has 4 wires, pink, yellow, grey and black. They are labeled black-L, yellow-1, pink-2, grey-3(strip). New switch has 3 wires, red, blue and black. Labeled, black-L, red-1, blue-2. How I...

Branching a Receptacle from a Square-D pressure switch [ 1 Answers ]

I recently purchased a house that is serviced by a well. The pressure tank is located outside next to the house in a small shed. The previous owner wired a receptacle into the square-D pressure switch to allow them to power a light bulb to keep the pipes from freezing. The circuit is protected...

View more questions Search

Check out some similar questions!

Add your answer here.